Suitable For:
- Saxo 1.0x (4 stud wheels / rear discs) 1996-1998
- Saxo 1.1x/sx (4 stud wheels / rear discs) 1996-2003
- Saxo 1.4 VTS (4 stud wheels / rear discs) 1996-2003
- Saxo 1.5d (4 stud wheels / rear discs) 1996-2004
- Saxo 1.6 (4 stud wheels / rear discs) 1996-2004
- Saxo 1.6 VTL/VTR (4 stud wheels / rear discs) 1996-2003
- Saxo 1.6 VTS (4 stud wheels / rear discs) 1996-2003
- Xsara hatchback 1.4 (abs) / 1.5d (abs) / 1.9td (abs)
- Xsara hatchback 1.6i / 1.8i / 1.8d / 1.9d 1.9sd
- Xsara coupe 1.4i (abs) / 1.9d (abs)
- Xsara coupe 1.6i (abs) / 1.8i (abs) / 1.9td (abs)
- Xsara estate 1.4 / 1.5d / 1.6 / 1.8d / 1.9d
The range of HEL Performance brake pads has been tested and proven in a range of competitive MSA championships and racing series in the United Kingdom and Europe
With an impressive operating temperature window of 0-800°C, these pads will handle the most serious braking conditions and are developed exclusively for racing or track day use
HP600
The HP600 also has a ceramic super metal compound that has a milder initial bite than the HP666 but still retains the same excellent control and pedal feel with a powerful friction coefficient of 0.35–0.48μ over a temperature range of 0-600°C. This is a great all-around track day pad that will outperform a lot of more expensive pads. Similar in the compound to the Ferodo DS2500, we have had very good results combining this pad with a plain disc such as Pagid
Eliminating Brake Fade
When brake pads run at high temperatures, a layer of gas can sometimes be created between the pad and the brake disc. This can make the driver feel like they have lost braking power as the brake pedal feels the same but the car will not stop as quickly, this is called brake fade. To remedy this, a slot is cut into all HEL Performance pads to offer the gasses a route to escape
NUCAP NRS Hooked Back Plate
Because brake pads are subjected to huge pressures from the pistons, the back plate of the pad must remain flat to offer optimal performance. We use NUCAP NRS hooked back plates so there is both a mechanical and adhesive bond between the pad friction material and the back plate
The "Bulletproof" NRS system has hundreds of steel hooks that create a permanent bond with the friction material. This mechanical attachment holds the friction material better than any adhesive could
NRS also allows the pad to be run down to the last few millimetres of friction material, while still maintaining 100% retention, increasing the lifespan of your brake pads and saving you money on replacements
Bedding In
HEL Performance brake pads are put through a heat curing treatment in the manufacturing process. This process removes unwanted gasses from the materials in advance, reducing the gasses that can cause fade within the brake pad. Because of this treatment, our brake pads only need light bedding in to match the padding to the disc
Brake pads should be bedded in until up to mid-range working temperature and then allowed to cool properly. This will also help to remove any gasses that are still within the pad. Not following this process may cause problems leading to a decrease in optimum performance
Designed and manufactured in the UK
Designed for Motorsport use, no instructions included
At Matt Lewis Racing, we are proud to be based in the UK and committed to delivering our products to customers both domestically and internationally. Our goal is to provide fast, reliable shipping that makes it easy for you to receive your order as soon as possible.
Domestic Shipping:
- We ship to all locations within the UK, including England, Scotland, Wales, and Northern Ireland
- All orders to England & Wales will be shipped via Royal Mail or DPD
- All orders to Northern Ireland, Scotland/Scottish Highlands & Islands and the British Isles will be shipped by Royal Mail or a suitable courier service available to select at checkout
- The Royal Mail 48 shipping option typically requires 2-3 working days* for delivery, while the Royal Mail 24 service generally takes 1-2 working days* to deliver
- Some items are not stocked and do not have a 24hr postage service available. This will be noted at the bottom of the item page
International Shipping:
- We offer international shipping to most countries around the world
- International orders will be shipped via a Royal Mail Tracked service or the courier selected at checkout
- Delivery time for international orders varies based on location & shipping service, but we will provide you with a tracking number at the time of shipping
- For all orders shipped by Royal Mail the overseas postal tracking service can be found here: https://www.royalmail.com/sending/international/overseas-postal-tracking
Most orders purchased before 3pm will be sent out the same day, unless there is a note at the bottom of the item page. This usually applies to non stocked items so please allow an extra 2-3 working days for delivery
Both UK & International Royal Mail services are updated with details of any delays here: https://www.royalmail.com/service-update
If your delivery address is located outside of the UK, you may be required to pay import duties and taxes. These charges are imposed by your country's customs authorities when the shipment arrives at your location. Customs policies differ among countries, and all international shipments may be subject to cross-border inspections. You will be responsible for any additional charges related to customs clearance, and we suggest that you contact your local customs office for more details
We understand that getting your products quickly is important to you, which is why we make every effort to get your order to you as soon as possible. If you have any questions about our shipping policy, please don't hesitate to contact us
*This is an estimated delivery aim from Royal Mail, not a guaranteed delivery time
At Matt Lewis Racing we want you to be completely satisfied with your purchase. If you’re unhappy with your purchase, please contact us immediately. We will first attempt to resolve your issue with the purchase or alternatively offer a refund or exchange in accordance with the below policy:
UK and EU Customers:
Under UK and EU consumer law you have the right to a refund of the purchased goods within 30 days. Within the 30 day period a refund or exchange will be conditional on the product and its packaging being returned in its original condition. You will be responsible for the postage cost of returning the goods
If the product is received by you, the consumer in a defective or damaged state we will offer a full refund or exchange. Photographic evidence will be required. The product will need to be returned before a refund or exchange can be processed
All returns MUST be authorised by us in advance
Customers Outside the UK & EU:
Customers outside the UK and EU are subject to the laws and regulations of their respective countries. We will comply with any applicable laws and regulations regarding returns, refunds, and exchanges. Please contact us for more information on returns and refunds outside of the UK and EU
Exchanges:
If you would like to exchange a product, please contact us with your order number and details of the product you would like to exchange. We will be happy to arrange an exchange for you, subject to availability
Refunds:
If you would like a refund, please contact us with your order number and details of the product you would like to return. We will process your refund within 48 hours of receiving the returned product. Please note that we will not be able to issue a refund until we have received the returned product
Exceptions:
Please note that certain products may be exempt from our refund and exchange policy. These include custom-made products, special orders, and products that have been used or damaged
If you have any questions or concerns about our refund and exchange policy, please do not hesitate to contact us. We believe that our customers should be completely satisfied with their purchase and will do our best to address your concerns
